There are several types of professional carpet cleaning out there, all of which are meant to get the dirt out of your carpet. They all do the same thing in the end, but not all types of carpet cleaning are equal. Some work better on different types of carpeting, and others perform well in high-traffic areas. The best type depends on your home.

What is the Best Type of Professional Carpet Cleaning?

Before we go through the best type of professional carpet cleaning services in Daytona Beach, let’s talk about all of your options, including hot water extraction, carpet shampooing, and carpet dry cleaning too.

Hot Water Extraction

You’ve probably heard of this type of carpet cleaning since it’s more commonly referred to as steam cleaning. Steam cleaning works as the name suggests: using steam. The carpet is first pre-conditioned with a chemical cleaner that is meant to lift dirt and anything else that may be stuck in your carpet fibers. 

Heated water is then pressurized to become steam before it is injected into the carpet. After around 15 minutes, all of this is sucked up with a vacuum.

Steam cleaning works best for the removal of ingrained dirt and deep stains, and doesn’t leave any residue or odors in your carpeting. Especially if you have pets, this is the best method for getting smelly stains out. Your only problem might be the cost, and the fact that you have to wait a while for the carpeting to dry.

Carpet Shampooing

Most people don’t shampoo their carpets anymore, but this is still a viable option. It works like you would expect as you put a cleaning solution into the carpet in the form of a wet foam. The problem with this method is that the foam can leave behind a residue, and you do have to remember to rinse out the carpet after you’ve applied the shampoo. This reduces the sticky feeling in your carpeting.

This method can feel like a lot of work for some people, since you have to apply not only the solution, but you need to rinse it out too. Then again, it is less expensive than the machinery you’ll need for a steam cleaning.

Dry Carpet Cleaning

There are solutions that you can buy at the store that will help you with dry carpet cleaning. You only need to shake these powder solutions above your carpeting. The solution will work to absorb the dirt in your carpeting, so after 15 minutes, you can just vacuum it up. If you’re looking for a quick sort of clean, this is the perfect method. 

This is also a great method if you have jute, coir, or seagrass flooring, which are prone to damage and shrinkage if they get wet. For these types of carpeting, dry carpet cleaning is the best option.

This is a convenient method because there’s very little drying time and it’s easy to do. You may not like the harsh chemicals used in these solutions either, and you shouldn’t try to use this on plush pile carpeting, which can trap the powder mixture.

Foam Cleaning

You have the ability to clean with foam too. Just like the powder, a cleaning solution is distributed evenly across the surface of the carpet, but then it is whipped into a foam. The foam is then worked into your carpeting with a rotating brush. Once the foam sits for a little while, it can be removed with a vacuum cleaner, and since there’s so much foam and very little water, this works for water-sensitive carpets.

You will need about an hour to wait until the carpeting is dry and ready to use again, which is faster than other options. You won’t necessarily be able to get the dirt that’s deeply embedded into the carpeting though.

Conclusion

In terms of the best carpet cleaning option, it really depends on what you’re looking for. If you want to get the most amount of dirt possible, hot water extraction may be best. If you have carpeting that doesn’t work well with water, foam cleaning or dry carpet cleaning is better. There’s also carpet shampooing as a cheaper yet more time-consuming option. Which method you use just depends on what method will work best for your carpets.